UPVC Replacement Door Handles
As time passes, the handles on your doors will get worn out and will require replacement. When doing this it is essential that the new handles match the dimensions of the previous handle.
The top screw's location, the lever and the keyhole dimensions are the three measurements you need to verify. Check the size guide for assistance with this.
Inline Lever/Lever
A lever/lever handle is a modern-day door handle that is designed to fit new or replacement doors. This kind of door handle is available in a wide range of designs and finishes. This handle is offered by several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite handles are made from robust materials, and are perfect for doors with multiple points that need a heavy-duty design. The handles are inline, and they use the same screws and spindle to fix them. They can be easily installed on any uPVC/Composite door.
The sprung lever design allows the handle to be set and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested to 200,000 cycles. This ensures that the quality of finish and performance will last for a long time. The sprung lever is also adjustable to fit a wide range of locks. This is particularly beneficial for doors with narrower frames, where the cylinder is further back. A lever that is shorter can be used for doors with a latch that can be activated with the thumb inside.
Lever Pad
A Lever Pad door handle made of upvc functions differently from lever-type handles on doors. These handles are operated by a single spindle or by two spindles, either inline or offset. They are typically utilized on UPVC doors with double glazing. They are available in a variety of finishes and variations.
The handles are available in a variety of finishes including White chrome and Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This gives the handle an outstanding performance and durability to serve the purpose it was designed for.
All UPVC handle lever pads include a spindle and screws, and can be fitted on a uPVC door. The 211mm backplate fixation centres allow for a wider handle, which is often an advantage when replacing a damaged or old multi-point door lock mechanism. These handle levers have springs, which eliminate the problem of door handles that sag out of horizontal position when not being used.
It is important to ensure that the PZ dimensions for both the multipoint lock and the uPVC doors when choosing the replacement UPVC spindle and handle. This measurement is often called the "handle centre" or "cylinder centres and is an essential aspect of matching up the right handles.
Once you have decided on the proper PZ size, you will need to ensure that the lever and push pads are shaped to match the American with Disabilities Act compliant handles you require for your door. These are typically square or round with an internal lever, and an external push pad.
Most of the UPVC lever pads we offer are sprung, which means that they will return to their horizontal position after not being used, instead of hanging out and possibly sticking in the frame. This helps prevent the draughts and cold air from entering a home. The majority of UPVC lever pad style handles are available in left and right handed versions that allow them to be installed on either side of doors.
Euro Cylinder
Cylinder locks are found on uPVC and other types of doors. They operate with a key to unlock a cylinder that then reveals pins which can be aligned to those inside the lock body, allowing them to turn the cam, thereby opening the door. Euro Cylinders can be fitted with up to six pins, with both internal and external doors usually needing different levels of security.
Choosing the right cylinder is essential; it is dependent on how your doors and handles are utilized. Doors that are external, for instance, should be fitted with cylinders with greater security and internal doors can be secured with a standard cylinder. Some cylinders have extra features that can increase security, like anti drill or anti bump properties.
A euro cylinder needs to be measured correctly to ensure that it is the correct size for your door. The cylinder should be measured from the central fixing screw hole to the other end of the cylinder, including the thumb turn if you have one. It is best to do this with the lock in place however in the event that this is not possible, you may remove it to measure. It is crucial to avoid having a extension of the cylinder beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.
Most modern cylinders are made with anti-drill and bump resistance features included in their design. They are designed to decrease attack chances by forcing the cylinders to rotate in a different direction. This can help deflect the attack, and protect your door.
Some cylinders are designed to withstand snapping. This is a typical attack on cylinders. A specific tool is used to break the break line of the lock, and then the front of cylinder is snapped off. This is a much faster and simpler method to gain access than through the use of a multipoint locking system. It also leaves less evidence of the burglary which could delay insurance claims.
Spring Cassette
The spring cassette is positioned within the base of your door handle's backplate, supplying a spring-loaded solution and returning the multipoint lock handles back to their rest position after use. In the past, a lot of handles of this kind did not have a spring built into them, and as a result, they can droop or drop when the locking mechanism has been disengaged. This simple component is the best way to address this issue. It also prevents your door from getting stuck in the open or closed position, as they aren't easy to close manually.
These spring cassettes were designed to be used with sprung multipoint lock. They won't work with unsprung handles and you'll have to cut a hole in your backplate in order for them to fit. (Please see More for a technical diagram). They are a replacement for existing broken or missing cassettes within the backplate of the door handle for numerous kinds of uPVC doors. They are supplied in a single unit. They feature a square cut out that accommodates an 8mm shaft.
These spring cassettes are a fantastic value-for-money solution to the issue of handles on your doors sagging. They are easy to fit and will extend the life span of your uPVC doors. Contact us to learn more about our range of uPVC accessories and spares. We are on hand to assist you and offer professional advice.